X62 6S2P 480W Micro Energy Storage Station

DIY kit, 21700 flat‑top batteries NOT included, batteries need user self‑purchase

Main selling points

• Peak 480W high‑power output, 6S2P for 12pcs 21700 flat‑top cells

• Dual USB‑C 100W bidirectional, support PD & UFCS fast‑charge protocol

• Dual XT60F + DC5.5‑2.5 high‑power DC ports for 18‑25.2V devices

• 2.2‑inch color screen + Bluetooth monitoring via mini‑program / APP

• 6063 aviation aluminum alloy shell, great heat dissipation

• Solder‑free installation, complete BMS multi‑safety protection

• Support charge‑while‑discharge

Application Scenarios

Outdoor camping, car fridge, photography fill light, drone charging, lab equipment testing, 24V DC backup power, electronic DIY projects.

Battery Important Notice

⚠️ No batteries inside package.
Must use 12pcs brand‑new, consistent 21700 flat‑top lithium‑ion cells.
Do not mix different brand/capacity/old‑new batteries. Trim about 1mm insulation on battery negative terminal before installation.

8‑Step Solder‑free Installation

1. Remove front panel

2. Open housing, disconnect front‑panel harness

3. Take out motherboard & battery holder

4. Prepare qualified 21700 flat‑top batteries

5. Insert batteries into holders correctly

6. Double‑check all batteries are fully seated

7. Reconnect internal wire harness

8. Install front panel, power on and test interfaces

   

Package Contents

✅ X62 Main Unit ×1
✅ 25.2V 1A Charger ×1
✅ Magnetic Screwdriver ×1
✅ XT60M‑to‑DC Cable ×1
✅ User Manual ×1
❌ Batteries are not included

Usage Reminders

1. For adult operation only, minors are not allowed to install or use alone.

2. When multiple USB ports work together, fast‑charge will be disabled, total power ~15W@5V.

3. XT60F max 20A; DC5.5‑2.5 port max 10A. Confirm device voltage range before connecting.

4. Use in dry & ventilated place. Stop use immediately if overheat, smell, deformation or water ingress happens.

5. Actual performance depends on your battery quality, consistency and load.

   

Disclaimer

This is a DIY power station kit without batteries. Improper battery selection or wrong installation may cause safety risks. Users take full responsibility for assembly and operation. Please read manual carefully before use.