Heltec Relay Smart BMS 48S 64S 96S 110S 200V 300V Hight Voltage BMS Energy Storage System CAN RS485 for 3.2V Lifepo4 Battery Pack

$1,062.00$1,566.00

Categories: , SKU: N/A

Description

Better to Contact us to know more detail if you need a high voltage system

This is our real project for 110S 352V Solar Energy Storage

This client just want save money choose two package , one is 55S, but it is not good for package or any repair . So if you need high voltage bms system . Just contact us .

For Exampel

if you one battery packge is 16S , and need 10pcs pack, total 160S . 512V battery pack .

so you need 10pcs slave bms board . and other accessoires.

LIKE 64S system. choose two 32S battery pack, but the salve price is same as 36S . so just choose below 36S , will be ok .

Above 32S BMS Customized

Pls Contact us if you want to make above 32S battery pack

Suggestion

Below 200A choose 2 Relay is enough

above 200A choose 3pcs relay

if used on like Heavy Truck start up. choose 4pcs relay

if you want to USE ON RS485 OR CAN , you need buy a Serial port module as below:

Noraml Feture (High voltage contact us .)

Voltage requirements 10~20V~55V~120V

Dynamic self-consumption: ≤1.5W

Static self-consumption: ≤50uA

System startup mode: external soft switch signal trigger

SOC estimation difference: ±5%

Balance current: 60mA

Working temperature: -40~85°C

Support battery pack: 3-4S, 6-16S .17-24S

Single string voltage collection range: 0~5V

Single string voltage collection error: ±10mV FS

Total battery voltage collection range: depends on specifications

Total battery voltage collection error: ±100MV FS

Charge and discharge current collection range: >500A

Charge and discharge current collection error: ±2%

NTC temperature control collection range: -40~125°C

NTC temperature control check error: ±1°C

Communication:

1* UART Support Modbus protocol

1*Isolated RS485 interface, support Modbus protocol

1*Independent CAN2.0B interface

Ternary Lithium Battery

Overcharge protection: 4.25V

Charge release protection: 4.15V

Charge detection delay: 1000mS

Discharge and power failure protection: 2.7V±0.1V

Discharge release protection: 2.9V±0.1V

Discharge detection delay: 1000mS

Charging current: number of strings*4.2V

Continuous current: 200A~500A

Overcurrent protection: 200A *3-8 Times

Overcurrent detection delay: 3000mS

Overcurrent release protection: disconnect the load

Short-circuit protection: load short-circuit through the protection board (no direct short-circuit BMS)

Charging and discharging temperature: ≥75°C

Reset social equipment: <50°C

Condition range: -20°C ~85°C

Opening conditions of balanced pressure difference: 0.02V-0.05V

Lifepo4 Battery

Overcharge protection: 3.65V

Charge release protection: 3.55V

Charge detection delay: 1000mS

Discharge and power-off protection: 2.4V±0.1V

Discharge release protection: 2.6V±0.1V

Discharge detection delay: 1000mS

Charging current: number of strings*3.6V

Continuous current: 200A~500A

Overcurrent protection: 200A *3-8 Times

Overcurrent detection delay: 3000mS

Overcurrent release protection: disconnect the load

Short-circuit protection: load short-circuit through the protection board (no direct short-circuit BMS)

Charging and discharging temperature: ≥75°C

Reset social equipment: <50°C

Condition range: -20°C ~85°C

Opening conditions of balanced pressure difference: 0.02V-0.05V

The scheme of control relay

Compatible with battery pack.

App modifies parameters, supports Li ion and lifepo4

Products schematics

It can control 2-4 relays to control power off, connect with Hall sensor and shunt, and charge and discharge different ports.

DC relay

Customers need to equip their own relays, select the required current, and support the choice to cut off the positive or negative wire.

Various mainstream relays can be used, with convenient selection and more stable use.

3s-4s is collected by shunt and 6s-24s is collected by Hall sensor.

Cables mark

Each cable has a corresponding mark to facilitate customers to identify the corresponding function

Bluetooth module

Bluetooth transmits signals, mobile phone APP receives information, and the effective distance is within 10 meters.

APP

You can view the battery status and adjust the BMS parameters by Phone Bluetooth APP. If you don’t know how to use it, please contact us to get the English manual.

Note: iPhone can only view parameters but cannot adjust parameters.

Balance Function

After setting the battery voltage difference between 0.02V-0.05V, it will automatically turn on, and the balance current will be 60mA.

*This balance power can only play an auxiliary role. If the actual deviation is large, a special balance instrument is required

PC software

Our development and adaptation of the PC BMS PC software supports monitoring parameters, modify the configuration and other functions. Notice: It must be used with UART or RS485 module to USB . Please contact us to purchase if you need it.

NTC

The product has 3-4 temperature sensors with a length of 500mm. It can collect current battery temperature information.

Connection

Additional information

Battery Type

Battery pack

Below 24S each pack

String

, , ,

Current

Reviews

There are no reviews yet.

Be the first to review “Heltec Relay Smart BMS 48S 64S 96S 110S 200V 300V Hight Voltage BMS Energy Storage System CAN RS485 for 3.2V Lifepo4 Battery Pack”