Feture
Rated Voltage: 36V/48V/60V/72V
Rated power: 350W/500W/800W/1000W
Current: 18/30A 35A 40A ±1A
Handle voltage: 1.1 ± 4.2V
Controller Wiring Harness Description
On the controller, there is a separate yellow wire for the high-voltage level brake and a black-and-white wirefor the low-voltage level brake: use the high-voltage level brake if the brake voltage is above 5V, and the low-voltage level brake if the voltage is below 5V.
First, check how many wires come out of your brake:
• If there’s one wire, connect it to the high-voltage level brake.
• If there are two wires (from the throttle assembly), pull out the blue wire of the low-voltage level brake and combine it with the throttle wire — this will achieve the brake-cut-off effect.
Both high-voltage and low-voltage level brakes serve the same purpose: cutting off power when braking.
